Skip to content
fixwert

High temperatures despite clean fans

Atari MEGA ST: Replace thermal paste

Is “Replace thermal paste” worth it for the Atari MEGA ST?

Repair probably worth itData quality: low

Atari MEGA ST, Replace thermal paste: we don't have our own prices for this exact model yet – repair probably worth it (rule of thumb based on fault type and device age).

* Affiliate link: we may receive a commission; the price stays the same for you.

Experienced45 min–2 hDraft

Data as of:

At a glance

Atari MEGA ST: Replace thermal paste – costs and options
VerdictRepair probably worth it (Data quality: low)estimate
Independent repair shopopen
Repair it yourself (parts)openbuy on eBay*
Buy used (same model)openbuy on eBay*
Data as of12/11/2026

All prices on this page come from Germany (euros) – we don't have prices for your country yet. Enter quotes from your country in the calculator below.

We don't have verified prices for the Atari MEGA ST yet. Get a quote (or check the used price on eBay) and enter the values in the calculator below – the recommendation will then use your numbers.

Repair probably worth itData quality: low

Possible saving

Not yet known

Get a quote and enter it in the calculator below – then we work out the exact saving.

  • Rule of thumb: this fault affects a wear part or can be fixed by cleaning – the repair usually costs only a fraction of a replacement.
  • At an assumed 4 years, there is still time left until the typical service life (7 years).
  • For an exact calculation: get a quote and enter it in the calculator below.

Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.

* Affiliate link: we may receive a commission; the price stays the same for you.

Options compared

01

Repair it yourself

Price on eBay
Experienced45 min–2 h
Pros and cons
  • + Usually the cheapest option
  • + Device stays with you, no data loss from shipping
  • − Risk of further damage
  • − Tools needed, water resistance may be lost

No verified part price yet – the button below shows current offers.

02

Have it repaired

no data
Pros and cons
  • + Warranty on the repair
  • + No personal risk, often same day
  • − More expensive than DIY
  • − Device may be gone for a few days
Find a repair shop
03

Buy used

no data

Same model, used

Atari MEGA ST is no longer sold new – so we compare with the used price.

Pros and cons
  • + Works immediately, cheaper than new
  • + Same model – nothing new to get used to
  • − Battery and housing are used
  • − Warranty often only 1 year or excluded
Buy used on eBay*

Recalculate with your values

Adjust age, condition and prices – for example with a real quote from a repair shop.

Spare-part cost
€
–
€
Repair at a shop
€
–
€

Tip: enter a real quote here.

Same model used
€
–
€

E.g. current offers on eBay or refurbished shops.

Successor / comparable new (optional)
€
–
€
Repair probably worth itData quality: low

Possible saving

Not yet known

Get a quote and enter it in the calculator below – then we work out the exact saving.

  • Rule of thumb: this fault affects a wear part or can be fixed by cleaning – the repair usually costs only a fraction of a replacement.
  • At an assumed 4 years, there is still time left until the typical service life (7 years).
  • For an exact calculation: get a quote and enter it in the calculator below.

Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.

Missing information:

  • Price of a replacement device (used or new)
  • Cost of spare parts or repair shop
How it was calculated
OptionCostUsePer year
Repair it yourself–––
Have it repaired–––
Buy used–––
Buy new–––
  • We recommend the option with the lowest cost per year of use – only if it wins in both the best and the worst case.
  • Typical service life for this device category: 7 years.
  • Condition factor “good”: 1.
  • Used/refurbished: same model, on average 75 % as old as your device – at most 65 % of the typical service life.
  • This model is no longer sold new – we compare with the used price of the same model.
Full methodology

Possible causes

  • Dried-out thermal paste
  • Shifted or aged thermal pads

Buy the spare part

Find the spare part for Atari MEGA ST on eBay*

Before buying, compare the model number in the listing with your device. * Affiliate link: we may receive a commission; the price stays the same for you.

Guide

Experienced45 min–2 h

Tools needed

Tools and materials marked with 🛒 lead to a matching eBay search. * Affiliate link: we may receive a commission; the price stays the same for you.

General procedure, not yet reviewed by an expert for the Atari MEGA ST. Screw positions and cable order are in the model-specific guide (links below).

If cleaning doesn't help, the thermal paste has often dried out. On graphics cards, thermal pads are also crucial – their thickness must match exactly.

Progress0/6
  1. Note baseline temperatures

    Note temperature and hotspot under a reproducible load (e.g. a benchmark loop) so you can compare the result.

  2. Remove and ground

    Cut power, remove the component, put on an antistatic wrist strap.

  3. Loosen the cooler

    Loosen the screws crosswise. Lift the cooler straight off without twisting – pads can stick.

    Measure or document pad thicknesses before removing them.

  4. Remove old paste

    Clean the chip and cooler base with isopropyl alcohol and a lint-free cloth.

  5. Apply new paste and pads

    Apply a little paste in the centre, place pads of identical thickness in the same spots.

  6. Mount the cooler and test

    Tighten screws evenly crosswise, reinstall and compare temperatures with the baseline.

Function test after the repair
  • Same load as before, compare temperature and hotspot
  • Check memory temperature (GPU)
  • Stability over 30 minutes

Frequently asked questions

Is “Replace thermal paste” still worth it for the Atari MEGA ST?

Repair probably worth it. Rule of thumb: this fault affects a wear part or can be fixed by cleaning – the repair usually costs only a fraction of a replacement. At an assumed 4 years, there is still time left until the typical service life (7 years). Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.

Can I do “Replace thermal paste” on the Atari MEGA ST myself?

Yes. Difficulty: for experienced users, time needed about 45 minutes to 2 hours. You need: Precision screwdriver set, Thermal paste, Thermal pads (matching thickness), Isopropyl alcohol (≥ 90 %). Use thermal pads of exactly the right thickness – the wrong thickness can overheat memory.

Where can I get the Atari MEGA ST repaired?

At independent repair shops near you or at the manufacturer. Our repair-shop finder searches by postcode – sorted only by distance, without paid placements. Workshop prices on Fixwert apply to repairs on site; if you send the device in, shipping costs may be added.