Repair it yourself
Pros and cons
- + Usually the cheapest option
- + Device stays with you, no data loss from shipping
- − Risk of further damage
- − Tools needed, water resistance may be lost
No reliable spare-part prices known.
High temperatures despite clean fans
Both options similarly attractiveData quality: low
CompuLab mintBox Basic, Replace thermal paste: we don't have our own prices for this exact model yet – both options similarly attractive (rule of thumb based on fault type and device age).
Data as of:
| Verdict | Both options similarly attractive (Data quality: low)estimate |
|---|---|
| Independent repair shop | open |
| Repair it yourself (parts) | open |
| Data as of | 12/11/2026 |
All prices on this page come from Germany (euros) – we don't have prices for your country yet. Enter quotes from your country in the calculator below.
We don't have verified prices for the CompuLab mintBox Basic yet. Get a quote (or check the used price on eBay) and enter the values in the calculator below – the recommendation will then use your numbers.
Possible saving
Not yet known
Get a quote and enter it in the calculator below – then we work out the exact saving.
Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.
No reliable spare-part prices known.
Same model, used
CompuLab mintBox Basic is no longer sold new – so we compare with the used price.
Adjust age, condition and prices – for example with a real quote from a repair shop.
Possible saving
Not yet known
Get a quote and enter it in the calculator below – then we work out the exact saving.
Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.
Missing information:
The device has reached its typical service life – further faults become more likely.
| Option | Cost | Use | Per year |
|---|---|---|---|
| Repair it yourself | – | – | – |
| Have it repaired | – | – | – |
| Buy used | – | – | – |
| Buy new | – | – | – |
General procedure, not yet reviewed by an expert for the CompuLab mintBox Basic. Screw positions and cable order are in the model-specific guide (links below).
If cleaning doesn't help, the thermal paste has often dried out. On graphics cards, thermal pads are also crucial – their thickness must match exactly.
Note temperature and hotspot under a reproducible load (e.g. a benchmark loop) so you can compare the result.
Cut power, remove the component, put on an antistatic wrist strap.
Loosen the screws crosswise. Lift the cooler straight off without twisting – pads can stick.
Measure or document pad thicknesses before removing them.
Clean the chip and cooler base with isopropyl alcohol and a lint-free cloth.
Apply a little paste in the centre, place pads of identical thickness in the same spots.
Tighten screws evenly crosswise, reinstall and compare temperatures with the baseline.
Both options similarly attractive. Rule of thumb: this fault affects a wear part or can be fixed by cleaning – the repair usually costs only a fraction of a replacement. At an assumed 8 years, the device has reached its typical service life (7 years) – further faults become more likely. Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.
Yes. Difficulty: for experienced users, time needed about 45 minutes to 2 hours. You need: Precision screwdriver set, Thermal paste, Thermal pads (matching thickness), Isopropyl alcohol (≥ 90 %). Use thermal pads of exactly the right thickness – the wrong thickness can overheat memory.
At independent repair shops near you or at the manufacturer. Our repair-shop finder searches by postcode – sorted only by distance, without paid placements.