Skip to content
fixwert

High temperatures despite clean fans

Eigenbau-/Gaming-PC: Replace thermal paste

Is “Replace thermal paste” worth it for the Eigenbau-/Gaming-PC?

Repair makes economic senseData quality: medium

Eigenbau-/Gaming-PC, Replace thermal paste: doing it yourself costs about €6–€11 for spare parts, at an independent shop about €30–€70. New it costs about €800–€1,400. The possible saving compared with buying new is therefore €789–€1,394.

* Affiliate link: we may receive a commission; the price stays the same for you.

Experienced45 min–2 hSourced

Data as of:

At a glance

Eigenbau-/Gaming-PC: Replace thermal paste – costs and options
VerdictRepair makes economic sense (Data quality: medium)
Independent repair shop€30–€70estimate
Repair it yourself (parts)€6–€11buy on eBay*
Buy used (same model)€450–€800estimate
Buy new€800–€1,400 – Neuer PC vergleichbarer Leistungestimate
Saving vs. buying new€789–€1,394
Data as of12/11/2026

All prices on this page come from Germany (euros) – we don't have prices for your country yet. Enter quotes from your country in the calculator below.

Repair makes economic senseData quality: medium

You save compared with buying new

€789–€1,394

  • The cheapest repair costs about €6–€11, a new device about €450–€800.
  • That saves you about €789–€1,394 compared with buying new.
  • Per extra year of use, the repair costs about €4–€7 and a replacement about €98–€174 (repair: approx. 4 years, replacement: approx. 4.6 years).

Some prices are sourced, some are editorial estimates.

* Affiliate link: we may receive a commission; the price stays the same for you.

Options compared

Recommended
01

Repair it yourself

€6–€11Sourced

Incl. risk of a failed attempt: €14–€29

Experienced45 min–2 h
Pros and cons
  • + Usually the cheapest option
  • + Device stays with you, no data loss from shipping
  • − Risk of further damage
  • − Tools needed, water resistance may be lost

For experienced tinkerers – risk of further damage.

Buy the part on eBay*Guide & parts
02

Have it repaired

€30–€70Estimate
Pros and cons
  • + Warranty on the repair
  • + No personal risk, often same day
  • − More expensive than DIY
  • − Device may be gone for a few days
Find a repair shop
03

Buy new

€800–€1,400Estimate

Neuer PC vergleichbarer Leistung

Advantages of buying new

  • 2-year statutory warranty in the EU – sellers may shorten it to 1 year for used goods, and private sales often exclude it entirely.
  • No signs of wear, complete accessories, plus a manufacturer's guarantee depending on the brand.
Alternative: refurbished€450–€800EstimateGebrauchter PC der Klasse

Recalculate with your values

Adjust age, condition and prices – for example with a real quote from a repair shop.

Spare-part cost
€
–
€
Repair at a shop
€
–
€

Tip: enter a real quote here.

Same model new
€
–
€
Used / refurbished
€
–
€
Repair makes economic senseData quality: medium

You save compared with buying new

€789–€1,394

  • The cheapest repair costs about €6–€11, a new device about €450–€800.
  • That saves you about €789–€1,394 compared with buying new.
  • Per extra year of use, the repair costs about €4–€7 and a replacement about €98–€174 (repair: approx. 4 years, replacement: approx. 4.6 years).

Some prices are sourced, some are editorial estimates.

How it was calculated
OptionCostUsePer year
Repair it yourself€14–€294 yrs€4–€7
Have it repaired€30–€704 yrs€8–€18
Buy used€450–€8004.6 yrs€98–€174
Buy new€800–€1,4007 yrs€114–€200
  • We recommend the option with the lowest cost per year of use – only if it wins in both the best and the worst case.
  • Typical service life for this device category: 7 years.
  • Condition factor “good”: 1.
  • Used/refurbished: same model, on average 75 % as old as your device – at most 65 % of the typical service life.
  • DIY success rate: 75 %. If it fails, the cost of a repair shop is added.
Full methodology

Possible causes

  • Dried-out thermal paste
  • Shifted or aged thermal pads

Spare parts

We only show parts for exactly this model. Real retailer prices appear once a retailer interface is connected; until then the links lead to the retailer's search.

Guide

Experienced45 min–2 h

Tools needed

Tools and materials marked with 🛒 lead to a matching eBay search. * Affiliate link: we may receive a commission; the price stays the same for you.

General procedure, not yet reviewed by an expert for the Eigenbau-/Gaming-PC. Screw positions and cable order are in the model-specific guide (links below).

If cleaning doesn't help, the thermal paste has often dried out. On graphics cards, thermal pads are also crucial – their thickness must match exactly.

Progress0/6
  1. Note baseline temperatures

    Note temperature and hotspot under a reproducible load (e.g. a benchmark loop) so you can compare the result.

  2. Remove and ground

    Cut power, remove the component, put on an antistatic wrist strap.

  3. Loosen the cooler

    Loosen the screws crosswise. Lift the cooler straight off without twisting – pads can stick.

    Measure or document pad thicknesses before removing them.

  4. Remove old paste

    Clean the chip and cooler base with isopropyl alcohol and a lint-free cloth.

  5. Apply new paste and pads

    Apply a little paste in the centre, place pads of identical thickness in the same spots.

  6. Mount the cooler and test

    Tighten screws evenly crosswise, reinstall and compare temperatures with the baseline.

Function test after the repair
  • Same load as before, compare temperature and hotspot
  • Check memory temperature (GPU)
  • Stability over 30 minutes

Frequently asked questions

How much does “Replace thermal paste” cost for the Eigenbau-/Gaming-PC?

Eigenbau-/Gaming-PC, Replace thermal paste: Doing it yourself costs about €6–€11 for the spare part, an independent shop charges about €30–€70. As of: 12/11/2026.

Is “Replace thermal paste” still worth it for the Eigenbau-/Gaming-PC?

Repair makes economic sense. The cheapest repair costs about €6–€11, a new device about €450–€800. That saves you about €789–€1,394 compared with buying new. Some prices are sourced, some are editorial estimates.

Can I do “Replace thermal paste” on the Eigenbau-/Gaming-PC myself?

Yes. Difficulty: for experienced users, time needed about 45 minutes to 2 hours. You need: Precision screwdriver set, Thermal paste, Thermal pads (matching thickness), Isopropyl alcohol (≥ 90 %). Use thermal pads of exactly the right thickness – the wrong thickness can overheat memory.

How much is the spare part for the Eigenbau-/Gaming-PC?

Thermal paste & thermal pads: about €6–€11. Before buying, check that the part is listed for exactly your model.

Where can I get the Eigenbau-/Gaming-PC repaired?

At independent repair shops near you or at the manufacturer. Our repair-shop finder searches by postcode – sorted only by distance, without paid placements. Workshop prices on Fixwert apply to repairs on site; if you send the device in, shipping costs may be added.