Is “Repair display” worth it for the TinyCircuits Pocket Arcade?
Both options similarly attractiveData quality: low
TinyCircuits Pocket Arcade, Repair display: we don't have our own prices for this exact model yet – for similar devices (Valve Steam Deck) a repair shop charges about €179–€199.
All prices on this page come from Germany (euros) – we don't have prices for your country yet. Enter quotes from your country in the calculator below.
We don't have verified prices for the TinyCircuits Pocket Arcade yet. Get a quote (or check the used price on eBay) and enter the values in the calculator below – the recommendation will then use your numbers.
Both options similarly attractiveData quality: low
Possible saving
Not yet known
Get a quote and enter it in the calculator below – then we work out the exact saving.
Rule of thumb: this fault affects an expensive component – whether repair pays off depends heavily on the device's age and residual value.
For comparison: for similar devices (Valve Steam Deck) a repair shop charges about €179–€199 – sourced prices of other models, not this device.
At an assumed 4 years, there is still time left until the typical service life (7 years).
For an exact calculation: get a quote and enter it in the calculator below.
Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.
We only show parts for exactly this model. Real retailer prices appear once a retailer interface is connected; until then the links lead to the retailer's search.
Display unit for TinyCircuits Pocket Arcade
Original or third-party – check with the seller
Compatibility: only TinyCircuits Pocket Arcade. Before buying, make sure the seller names exactly this model – similar names (e.g. “mini”, “Pro”, “Plus”) usually don't fit.
Tools and materials marked with 🛒 lead to a matching eBay search. * Affiliate link: we may receive a commission; the price stays the same for you.
General procedure, not yet reviewed by an expert for the TinyCircuits Pocket Arcade. Screw positions and cable order are in the model-specific guide (links below).
First check whether only the glass is cracked or the panel is also faulty (lines, black spots, no touch). On some devices you can replace just the glass.
Progress0/7
Assess the damage
Test the device via an external screen, sound or vibration: if it responds, usually only the display is affected.
Back up data and discharge the battery
Make a backup, discharge the battery below 25 %, switch the device off.
Tape over the cracked glass
Tape over the glass prevents splinters and gives the suction cup grip.
Wear safety glasses and gloves.
Loosen the display and disconnect the battery
Loosen the adhesive with heat and picks. Open the display like a book without straining cables. First unplug the battery connector, then the display cables.
Transfer parts
Depending on the model, sensors, speakers or brackets must be moved from the old display. Sort screws by position.
Test-connect the new display
Connect it before gluing, connect the battery, check picture, touch and brightness.
Glue and close
Use new frame adhesive, press the display on and let it rest as specified by the adhesive.
Is “Repair display” still worth it for the TinyCircuits Pocket Arcade?
+
Both options similarly attractive. Rule of thumb: this fault affects an expensive component – whether repair pays off depends heavily on the device's age and residual value. For comparison: for similar devices (Valve Steam Deck) a repair shop charges about €179–€199 – sourced prices of other models, not this device. Rule of thumb without model-specific prices for this device – a real quote makes the assessment reliable.
Can I do “Repair display” on the TinyCircuits Pocket Arcade myself?
+
Yes. Difficulty: medium, time needed about 45 minutes to 2 hours. You need: Heat gun or iOpener, Suction cup, Opening picks, Precision screwdriver set. When opening, the battery is often directly under the display – don't pierce it.
Original or third-party – which is better for the TinyCircuits Pocket Arcade?
+
Original parts fit for sure and keep all features, but cost more. Third-party parts are cheaper, but quality varies (e.g. LCD instead of OLED: worse colours, higher power use). Some manufacturers show a notice about an unknown part after the swap.
Where can I get the TinyCircuits Pocket Arcade repaired?
+
At independent repair shops near you or at the manufacturer. Our repair-shop finder searches by postcode – sorted only by distance, without paid placements. Workshop prices on Fixwert apply to repairs on site; if you send the device in, shipping costs may be added.